New Topology LNA Architecture using Inductive Drain Feedback Technique for Wireless Application
Abstract
This paper presents a design of a single LNA cascaded with double stage cascoded LNA amplifiers using an inductive drain feedback technique. The amplifier it is implemented using superHEMT FHX76LP transistor devices. The designed circuit is simulated with Ansoft Designer SV. The LNA was designed using inductive drain feedback, inductive generation to the source, and the T-network as a matching technique was used at the input and output terminal. The low noise amplifier (LNA) provides a gain (S21) of 68.94 dB and the noise figure (NF) of 0.64 dB. The return loss (S12) output reflection (S22) and input reflection (S11) are -88.39,-17.37 and –15.77 dB respectively. The measurement shows a 3-dB bandwidth of 1.72 GHz and stability are 4.54 more than 1 has been achieved. The input sensitivity is -92 dBm exceeded the standards required by IEEE 802.16.
Keywords
Full Text:
PDFDOI: http://doi.org/10.11591/ijeecs.v12.i12.pp8257-8267
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).