Submissions

Online Submissions

Already have a Username/Password for Indonesian Journal of Electrical Engineering and Computer Science?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

The authors must refer to the Indonesian Journal of Electrical Engineering and Computer Science (IJEECS) for writing format and style (Please download and use as a template for an initial manuscript submission) or LATEX version. Any papers not fulfilling the requirements based on the guideline of authors will not be processed.

It is now the policy of IJEECS to ask the author of each submitted paper to nominate three prospective reviewers for the paper. The Editor of IJEECS is very grateful if you could send us the names and full contact details (including the correct email address) of three individuals who have significant experience in the area covered by your paper.  The Editor then will select one of them and send your paper to him/her asking if they are willing to act as a reviewer of your paper. The Editor will also send your paper to two additional reviewers from our reviewers.

As soon as you send us your suggestions for reviewers, your paper (if it has matched with the guide for authors) will be sent out for review.  The Editor shall inform you of the results of the review as soon as possible, hopefully in 30 to 60 days.

Manuscript types acceptable for peer review

  1. Regular: This is a classic research article that has a hypothesis, investigation, solution, model, physical experiment, and/or simulation and a result that is of value to the community within that area of expertise
  2. Topical review: This is a review of an emerging area within the journal’s scope that performs a technical and critical review of other articles. Calculations are performed and conclusions are drawn on the strengths and weaknesses. The conclusion can also discuss future challenges.
  3. Theory: This is a scholarly article that uses mathematical methods to develop new theoretical results of importance to the field.
  4. Survey: A survey article analyzes, summarizes, systemizes, and presents fresh conclusions from a large number of recently published scholarly articles.
  5. Perspective: This category of article is an in-depth viewpoint article intended to bring together a big picture in a fast-evolving landscape of technological development. It will typically be a topic where there is community uncertainty and/or disagreement. This category of the article will typically be written by a leading authority in an area.
  6. Applied research: This article describes challenges and practical solutions for topics within the journal's scope. Quantitative results for validation of the approach are expected.
  7. Negative result: This is a non-trivial theoretical or experimental negative or null result that does not support a hypothesis. Provided that the research question posed is meaningful and the study is rigorously conducted, this type of article has value to the engineering community.
  8. Methods: This article will report the development of a new or improved fabrication or manufacturing technique, or a new experimental, measurement, or mathematical technique. Applied research articles focus on practical systems, while here the focus is on methods.
  9. Comment: This is an article that comments on another published article. A comment points out a technical error, oversight, or presents an opposing position. It is a critique, providing corrections, and performs analyses.
  10. Reply: A reply article is submitted by the authors of a published paper in response to a Comment article.

You can use this list to carry out a final check of your submission before you send it to the journal for review. Please check the relevant section in this Guide for Authors for more details.

  1. Is your manuscript adhere to the minimum standards? (written in English; the length of submitted paper is at least 4 pages and no more than 20 pages; use of a tool such as EndNote, Mendeley, or Zotero  for reference management and formatting, and choose IEEE style)
  2. Is your manuscript written in IAES format?  At this stage, it is essential that you follow every detail of the IAES format. Please try to follow the format as closely as possible.
  3. is your title adequate and is your abstract correctly written? The title of the paper is maxed 10 words, without Acronym or abbreviation. The Abstract (MAX 200 WORDS) should be informative and completely self-explanatory (no citation in the abstract), provide a clear statement of the problem, the proposed approach or solution, and point out major findings and conclusions.
  4. Authors are suggested to present their articles in the structure of the section: Introduction - The Proposed Method/Algorithm/Procedure specifically designed (optional) - Research Method - Results and Discussion - Conclusion. Authors may present complex proofs of theorems or non-obvious proofs of correctness of algorithms after the introduction section (obvious theorems & straightforward proofs of existing theorems are NOT needed).
  5. Introduction section: explain the context of the study and state the precise objective. An Introduction should contain the following three parts:
    - Background: Authors have to make clear what the context is. Ideally, authors should give an idea of the state-of-the-art field the report is about.
    - The Problem: If there was no problem, there would be no reason for writing a manuscript, and definitely no reason for reading it. So, please tell readers why they should proceed with reading. Experience shows that for this part a few lines are often sufficient.
    - The Proposed Solution: Now and only now! - authors may outline the contribution of the manuscript. Here authors have to make sure readers point out what are the novel aspects of authors' work.
    Authors should place the paper in proper context by citing relevant papers. At least, 5 references (recently journal articles) are used in this section.
  6. Method section: the presentation of the experimental methods should be clear and complete in every detail facilitating reproducibility by other scientists.
  7. Results and discussion section: The presentation of results should be simple and straightforward in style. This section reports the most important findings, including results of statistical analyses as appropriate and comparisons to other research results. Results given in figures should not be repeated in tables. This is where the author(s) should explain in words what he/she/they discovered in the research. It should be clearly laid out and in a logical sequence. This section should be supported suitable references.
  8. Conclusion section: Summarize sentences the primary outcomes of the study in a paragraph. Are the claims in this section supported by the results, do they seem reasonable? Have the authors indicated how the results relate to expectations and to earlier research? Does the article support or contradict previous theories? Does the conclusion explain how the research has moved the body of scientific knowledge forward?
  9. Language. If an article is poorly written due to grammatical errors, while it may make it more difficult to understand the science.
  10. Please be sure that the manuscript is up to date. It is expected that 10 to 20%  of references are from recent papers. 
  11. Is the manuscript clearly written?  Is the article exciting? Does the content flow well from one section to another? Please try to keep your manuscript on the proper level.  It should be easy to understand by well-qualified professionals, but at the same time please avoid describing well-known facts (use proper references instead). Often manuscripts receive negative reviews because reviewers are not able to understand the manuscript and this is the authors' (not reviewers') fault.  Notice, that if reviewers have difficulties, then other readers will face the same problem and there is no reason to publish the manuscript.
  12. Do you have enough references? We will usually expect a minimum of 25 references primarily to journal papers, depending on the length of the paper, the reference language should be in the English language. Citations of textbooks should be used very rarely and citations to web pages should be avoided. All cited papers should be referenced within the text of the manuscript.
  13. Figures and Tables. Relation of Tables or Figures and Text: Because tables and figures supplement the text, all tables and figures should be referenced in the text. Authors also must explain what the reader should look for when using the table or figure. Focus only on the important point the reader should draw from them, and leave the details for the reader to examine on her own.

    Figures:
    a. All figures appearing in the article must be numbered in the order that they appear in the text.
    b. Each figure must have a caption fully explaining the content
    c. Figure captions are presented as a paragraph starting with the figure number i.e. Figure 1, Figure 2, etc.
    d. Figure captions appear below the figure
    e. Each figure must be fully cited if taken from another article
    f.  All figures must be referred to in the body of the article

    Tables:
    a. Material that is tabular in nature must appear in a numbered captioned table.
    b. All tables appearing in the article must be numbered in the order that they appear in the text.
    c. Each table must have a caption fully explaining the content with the table number i.e. Table 1, Table 2, etc.
    d. Each column must have a clear and concise heading
    e. Tables are to be presented with a single horizontal line under the table caption, the column headings, and at the end of the table.
    f. All tables must be referred to in the body of the article
    g. Each table must be fully cited if taken from another article
  14. Each citation should be written in the order of appearance in the text. Citations and references must sequential. First citation in text is [1] and continued by [2], [3], [4], ...
  15. Please be aware that for the final submission of a regular paper you will be asked to tailor your paper so the last page is not half empty.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. Is your manuscript written in IAES format? At this stage, it is essential that you follow every detail of the IAES format. Please try to follow the format as closely as possible. Be sure to carefully review our most up-to-date manuscript submission guidelines.

    The submission file is in MS Word file format: https://iaescore.com/gfa/ijeecs.docx.

  3. All authors who submit to this journal must have an ORCID. If the authors do not already have an ORCID, they should create one before submitting their manuscript. ORCID is a persistent digital identifier that distinguishes you from other researchers and allows automated connections to your research activities. It was also required to have or register WoS ResearcherID, Scopus Author, Google Scholar, and Semantic Scholar Author profiles.
 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Registration Fee: 345.00 (USD)

To support the cost of wide open access dissemination of research results, to manage the various costs associated with handling and editing the submitted manuscripts, and to manage journal management and publication in general, the authors or the author's institution is requested to pay a publication fee. It is our policy that

  1. Each accepted paper will be charged USD 345 for paper collaboration.
  2. We do not appreciate papers with a single (sole) author. Papers with a single author will be charged twice, i.e., USD 690.
The above charges are for the first 8 pages, and any published manuscript over 8 pages will incur extra charges of USD 50 per page for the collaboration paper and USD 100 for the sole author. Biographies of authors are exempt from the APC fee.

Instructions for money transfer via bank transfer will be provided by the editor with the notification of acceptance for the accepted paper.