Measured Data Processing Method For Relative Motions Between Two Side-by-side Ships

Ping-an Shi, Jia-wei Ye

Abstract


In order to design and implement a wave compensation system to reduce the relative motion between two side-by-side ships in waves, a new method to process measured data of ship model test with contact measurement to study the characteristics of relative motion was presented. The reference co-ordinate systems and relative motions were defined, and the scheme of the model test was described. Then the Empirical Mode Decomposition(EMD) adaptive filter were designed, the frequency domain integration transform method based upon Fast Fourier Transform(FFT) were established. The procedure to transform acceleration signal into displacement was proposed and verified, and the processing results with and without EMD adaptive filter were compared. Finally, the relative motions consistent with reality were acquired, which indicates this method is effective for measured data processing.

 

DOI: http://dx.doi.org/10.11591/telkomnika.v11i1.1872


Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics