Scattering Parameters prediction for 433MHz SAWR with Minimum Insertion loss

M. M. Elsherbini, M. F. Elkordy, A. M. Gomaa

Abstract


A proposed schematic design for surface acoustic wave resonator (SAWR) is introduced in this paper. A simplified equivalent model for both one and two port 433MHz SAWR is built. Scattering parameters of the proposed design is extracted and compared with a commercial one of the same resonant frequency. Advanced system design tool is nominated to give the main parameters like Impedance and Admittance with their real and imaginary response. The insertion loss predicted mathematically and recorded from simulation then compared with the measured value. The proposed design tool introduced adequate results with minimum hardware procedure specifications.


Keywords


SAWR, Resonator and ADS.

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v1.i1.pp78-87

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics