Design and implementation of AMBA bridge protocol in system on chip design

Wang Hang Suan, Asral Bahari Jambek, Mohd Nazrin Bin Md Isa, Azizi bin Harun, Shaiful Nizam Bin Mohyar, Zulfiqar Ali Bin Abd. Aziz

Abstract


The Advanced Microcontroller Bus Architecture (AMBA) is widely used in modern technology device. The design of bridge in the system is due to increase demand of power consumption and functionality. The bridge help to reduce power by separate the system into high bandwidth and low bandwidth. The goal of this paper is to design and implement the AMBA bridge into a SoC design which consists of a processor, RAM, ROM, watchdog and LED module. These peripherals are connected separately based on different bandwidth with a bridge as the medium. The result shown the bridge transfer a correct data from the ROM into the RAM. The experiment was carry out using Synopsys 2017 and Keil uVision.

Keywords


ARM, Cortex-M0 SDK, AMBA, APB bridge, System-on-Chip

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v14.i2.pp788-795

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics