A new design of high output voltage rectifier for rectenna system at 2.45 GHz

Abdellah Taybi, A. Tajmouati, J. Zbitou, A. Errkik, M. Latrach, L. El Abdellaoui

Abstract


This paper deals with the design and achievement of a novel microstrip rectifier with high conversion efficiency and output voltage. Firstly, we have designed a rectifier based on HSMS2820 Schottky diodes by using a series topology to convert the electromagnetic energy into DC power. Then, a stepped-impedance low pass filter was implemented to filter the unwanted harmonics generated by the non-linear Schottky diode. Both of the structures have been simulated and fabricated on an FR4 substrate with dielectric permittivity constant 4.4, thickness of 1.6 mm and loss tangent of 0.025. Good performances were confirmed throughout the measurement results and an interesting output voltage was observed.


Keywords


Wireless power transmission; Microstrip rectifier; Schottky diode; Stepped-impedance low pass filter; Output voltage.

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v13.i1.pp226-234

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics