Fast Unbalanced Three-phase Adjustment Base on Single-phase Load Switching
Abstract
To balance three-phase loads in distribution network with abundant of single-phase loads, a new wiring method and three-phase loads adjustment policy was proposed in this paper. In the wiring method, a single-phase load was connected with phase A, B and C of trunk line by a controller. When the load of trunk line was unbalanced, the controller will switch the connected single-phase loads from one phase to another to balance it. The minimum count of loads adjustment algorithm and the most balance adjustment algorithm were proposed, which can adjust the three-phase load of trunk line to roughly balance automatically. This method can solve the serious three-phase unbalance problems of the trunk lines with aboundant of single-phase loads. It may instead of capacitive compensation in low voltage distribution network to improve power quality and reduce network losses.
DOI: http://dx.doi.org/10.11591/telkomnika.v11i8.3031
Keywords
Full Text:
PDFRefbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).