Contatc Analysis on Thread Connections of 32.8MN PRESS Columns

Zhicheng Huang, Nanxing Wu, Xingguo Wang

Abstract


Automatic hydraulic press is widely used for pressing ceramic wall and floor tiles, the four columns of its frame withstand the all work force when it works, so the columns are the key compartments of the frame, and its work performance has an important impact on the structural performance of the entire automatic hydraulic press. Took the column thread connection of 32.8MN automatic hydraulic press as research object, established axisymmetric finite element model and carried on contact finite element analysis for it by using the large commercial finite element software ANSYS to gain the stress distribution of the column’s thread connection. The results and discussion can provide reference for designing automatic hydraulic press columns.

 

DOI: http://dx.doi.org/10.11591/telkomnika.v11i7.2847


Keywords


Automatic hydraulic press; column; contact; finite element; thread connection

Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics