Antenna for humidity sensor using split ring resonator
Abstract
This paper presents an antenna as a humidity sensor application to control and monitor the quality of humidity. A passive sensor tag with low cost solution is suggested where it implemented on a low-cost substrate, FR4. A capacitive sensor that works from 0 to 1.5 GHz is implemented in the design. The capacitive sensor is designed based on a small antenna loaded with a Split ring resonator (SRR). To sense the humidity, the SRR resonator is coated with Kapton, placed on the top of the resonator. To validate the proposed method, a prototype was fabricated. The comparison between simulated and measured reflection coefficient is presented.
Keywords
Split ring resonator (SRR), Metamaterial, Small loop antenna, Humidity Sensor
Full Text:
PDFDOI: http://doi.org/10.11591/ijeecs.v13.i2.pp584-590
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).