A novel approach of multiplier design based on BCD decoder

Salah Alkurwy

Abstract


A novel approach of multiplier design is presented in this paper. The design idea is implemented based on binary coded decimal (BCD) decoder to seven segment display, by computing all the probability of multiplying 3 3 binary digits bits and grouping in table rows. The obtaining of the combinational logic functions is achieved by simplified the generated columns of [A5: A0], using a Karnaugh map. Then, the 3 3-bits multiplier circuit is used to implement the 6x6- and 12x 12-bit multipliers. Comparing with a conventional multiplier, the proposed design outperformed in terms of the time delay by a 32% and 41.8% respectively. It is also reduced the combinational adaptive look-up-tables (ALUTs) by 24.6%, and 46% for both multipliers. Both overmentioned advantages make the proposed multipliers more attractive and suitable for high-speed digital systems

 

 

 

 

 

 


Keywords


Binary multiplier, BCD decoder, Seven-segment display, Karnaugh map

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v14.i1.pp38-43

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics