Study in Step by Step Electric Energy Meter Connection Detection Method

Qing Zhiming, Fu Wang, Fei Wenli

Abstract


Electric energy meter wiring error variety, detection method and circuit can only detect some kinds of wrong wiring at present, as the current transformer and current detection unit terminal short-circuit characteristics of conventional methods in existence, not take out stitches under the premise of not achieving detection. Based on this, this paper puts forward a step detection method, detection circuit of voltage and current lines one by one through right off and polarity of current, gradually show every junction point junction and the fault point. Through the Multisim software simulation, and developed a set of wire detecting device, simulation and experimental results prove that the method is correct. Compared with conventional methods, can be more comprehensive and faster connection detection fault location.

 

DOI: http://dx.doi.org/10.11591/telkomnika.v14i1.7662 


Keywords


electric energy meter; wiring, detection, fault location, step by step

Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics