Comparison of Shielding Effectiveness in Complex Curved Structure with Different Numerical Methods, FDTD, MOM and Equivalent Circuit

Abstract

The study of the effect of shielding on high frequency equipment is very important in the electromagnetic compatibility of control and communication equipment. In this paper, while presenting a curved complex structure for the shielding enclosure, the different number of apertures with different dimensions has been investigated. A rectangular structure with two curved parts behind of the enclosure simulated based on numerical methods, FDTD, MOM and equivalent circuit for better analysis of electromagnetic interference. After introducing the proposed structure and presenting the curvature theory, simulation results are displayed and compared in the selected frequency range for three numerical methods. It has been shown that increasing the number of apertures by reducing the size, increases the effectiveness of the protective shield. However, increasing the number of resonances by increasing the apertures indicates the importance of studying the equipment more precisely before choosing the structure of enclosure. We present a complex structure for the enclosure and the different number and dimensions of apertures with different materials were investigated for analyzing the effect of shielding on electromagnetic interference. The necessity of choosing a more effective enclosure according to the frequency of the equipment is specified. Finally, three methods of numerical solution, FDTD, MOM and circuit equal comparition were performed with measured value. Changes in the Shielding effectiveness and the number of resonant in the frequency range were determined. The exact examination of equipment requires shielding and their frequency and the type of inside-to-outside communication device before choosing shieldin is important. We used a comparison of three numerical solution methods for examining the field distribution in a complex structure enclosure with different apertures and different materials. In the majority of cases, the proximity of the measured values in this frequency range with the MOM curves shows the performance of this method in complex structures.