Electrical discharge reproduction in rod-barrier-plane system

Abstract

The present paper deals with new modeling to reproduce the electric discharge in the rod-plane air gap system with rubber insulating barrier under AC and impulse voltage. This model considers the randomness character of discharge evolution which is governed by the electric field. The discharges shape obtained by this model are compared with ones given by experimental tests. The established model reproduces correctly the forms of discharges obtained by experimental tests under AC voltage. It is found that the behavior of the electrical discharge depends not only on the dimension (thickness and width) of the insulating barriers but on its positions in the air gap as well. It is to highlight that the mode of applied voltage is of key importance barrier. Experimental investigation shows that the developed arc can evolve on 1 to 4 channels. The generated discharges in AC voltage distinguish by the formation of a multiple-channel arc. Whereas, the discharge under lightning impulse voltage found to progress in a single channel whatever the barrier position and dimensions. The model confirms that electric field is the most important factor in the behavior of the rod-insulating barrier-plane system submitted to high voltage.