A Low-Voltage High PSRR and High Precision CMOS Bandgap Reference

Zhou Qianneng, Xue Rong, Li Hongjuan, Lin Jinzhao, Li Qi, Pang Yu, Li Guoquan

Abstract


By adopting the technique of pre-regulator, a high PSRR and low temperature coefficient piecewise-linear bandgap reference (BGR) is designed for analog and mixed-signal application in this paper. The piecewise-linear BGR with pre-regulator, which is analyzed and simulated in SMIC 0.18μm CMOS process, has simple circuit architecture. Simulation results show that piecewise-linear BGR with pre-regulator achieves power supply rejection ratio (PSRR) of -102.488dB and -99.73dB, -82.983dB at 10Hz, 100Hz and 1kHz respectively. Piecewise-linear BGR with pre-regulator achieves the temperature coefficient of 2.235 ppm/°C when temperature is in the range from -50°C to 115°C. When power supply voltage VDD changing from 1.2V to 10V, output voltage deviation of piecewise-linear BGR with pre-regulator is only 0.2765mV, but output voltage of piecewise-linear BGR without pre-regulator has a deviation of 38.08mV.

 

DOI : http://dx.doi.org/10.11591/telkomnika.v12i5.4056


Keywords


Piecewise compensation technique, pre-regulator, power supply rejection ratio (PSRR), bandgap reference (BGR)

Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics