A 5G graphene antenna produced by screen printing method

Siti Nor Hafizah Sa’don, Mohd Haizal Jamaluddin, Muhammad Ramlee Kamarudin, Fauzan Ahmad, Samsul Haimi Dahlan

Abstract


The save and fast manufacturing are required in order to achieve 5G technology. However, there are many kinds of manufacturing antenna which are depending on material applied in the antenna itself. Each type of manufacturing also has its own advantages and drawback. In this article, a graphene antenna for 5G applications is manufactured using screen printing method. A fine mesh resolution of 120 µm is used to print the antenna accurately. This kind of printing has capability to produce antenna in less than 5 minutes. The antenna made by conductive graphene ink has size of 11.8 x 12.2 x 0.076 mm3 and produced within a small amount of graphene ink. The measured antenna resonates at 15.04 GHz with reflection coefficient magnitude of -12.05 dB and percentage of impedance bandwidth is 30 % which is in the range of 13.3 to 18.0 GHz. The radiation pattern at E-plane and H-plane of the graphene antenna are simulated and measured where the result obtained are comparable.


Keywords


Graphene, Graphene antenna, Graphene ink, 5G antenna, Screen printing

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v15.i2.pp950-955

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Indonesian Journal of Electrical Engineering and Computer Science (IJEECS)
p-ISSN: 2502-4752, e-ISSN: 2502-4760
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).

shopify stats IJEECS visitor statistics