Investigating Thermal Effect on a Cross Linked Polyethylene Power Cable

Emna Khouildi, Rabah Attia, Rafik Cherni

Abstract


One of the agents responsible of the degradation of power cables in electrical distribution network is the temperature. In this paper, numerical modelling of temperature effect on the cross linked polyethylene (XLPE) insulation of a medium voltage cable containing internal defects, which are air void cavity and water tree cavities, is developed by using the finite element method and simulated by COMSOL Multiphysics Software. The experimental investigation is conducted through studying parial discharge inception voltages in XLPE insulation before and after 23 heating cycles of a 7 meters sample of a medium voltage cable at 100°C and 120°C temperatures. Partial discharge inception voltages detection were performed using the IEC60270 test method. The simulation results and experimental measurements assessed the thermal effect on the degradation of XLPE insulation.


Keywords


XLPE cable; Temperature; Finite element method (FEM); Partial discharge; IEC60270 test method

Full Text:

PDF


DOI: http://doi.org/10.11591/ijeecs.v5.i1.pp33-40
Total views : 690 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

shopify stats IJEECS visitor statistics