The MRAC Based - Adaptive Control System for Controlling the Speed of Direct Current Motor

Manh-Cuong Nguyen, Duc-Phuc Vuong, Trong-Thang Nguyen

Abstract


This research aims to propose an adaptive control system for controlling the speed of the Direct Current (DC) motor. The system consists of two control loops: the first control loop is a traditional PID controller and the second control loop is an adaptive controller. The role of the adaptive controller is adjusting the output of the control object follows with the output of the reference model. The adjustment mechanism is very simple, but the quality of the whole system is very high: the conversion time is short and there isn't overshoot. The quality of the proposed adaptive control system is also compared to the traditional PID control system to show the advantages of the new system.


References


Sekhar, G. R., & Banakara, B. (2018). An Internal Current Controlled BLDC Motor Drive Supplied with PV Fed High Voltage Gain DC-DC Converter. International Journal of Electrical and Computer Engineering (IJECE), 8(2), 1262.

Park, J. S., & Lee, K. D. Design and Implementation of BLDC Motor with Integrated Drive Circuit. International Journal of Power Electronics and Drive Systems (IJPEDS), 8(3), 1109-1116, 2017.

Trong, T. N., & Duc, M. N. (2015). The speed control system of BLDC using PID controller with PWM modulation technique. International Journal of Advanced and Appied Sciences, (2(12), 47-51.

Gunabalan, R., & Subbiah, V. Speed Sensorless Vector Control of Induction Motor Drive with PI and Fuzzy Controller. International Journal of Power Electronics and Drive Systems (IJPEDS), 5(3), 315, 2015.

Abdelhak, B., & Bachir, B. A High gain observer based sensorless nonlinear control of induction machine. International Journal of Power Electronics and Drive Systems (IJPEDS), 5(3), 305, 2015.

A. Ramesh, O. Chandra Sekhar, M. Siva Kumar (2018). A Novel Three Phase Multilevel Inverter with Single Dc Link For Induction Motor Drive Applications. International Journal of Electrical and Computer Engineering (IJECE), 8(2), pp. 763-770.

Nayak, B., & Sahu, S. (2019). Parameter estimation of DC motor through whale optimization algorithm. International Journal of Power Electronics and Drive Systems, 10(1), 83.

Solihin, M. I., Wahyudi, & Legowo, A. (2010). Fuzzy-tuned PID anti-swing control of automatic gantry crane. Journal of Vibration and Control, 16(1), pp.127-145.

Sakawa, Y., & Nakazumi, A. (1985). Modeling and control of a rotary crane. Journal of Dynamic Systems, Measurement, and Control, 107(3), pp.200-206.

Colby, R. S. (2000). U.S. Patent No. 6,163,472. Washington, DC: U.S. Patent and Trademark Office.

Petru, L., & Mazen, G. (2015). PWM control of a DC motor used to drive a conveyor belt. Procedia Engineering, 100, pp. 299-304.

Shen, Y., & Xia, X. (2014). Adaptive parameter estimation for an energy model of belt conveyor with DC motor. Asian Journal of Control, 16(4), pp.1122-1132.

BETZ, Robert Eric; MIRZAEVA, Galina; SUMMERS, Terrence J. A Dynamic dynamometer for testing of mining DC motors. In: 2010 IEEE Industry Applications Society Annual Meeting. IEEE, 2010. p.1-8.

Thomas, Neenu, and Dr P. Poongodi, "Position control of DC Motor using genetic algorithm based PID controller", Proceedings of the World Congress on Engineering, 2009, vol. 2, pp. 1-3.

Xue, Dingyu, Chunna Zhao, and YangQuan Chen, "Fractional order PID control of a DC-Motor with elastic shaft: a case study", American Control Conference, IEEE, 2006, pp.1-6.

Yao, Jianyong, Zongxia Jiao, and Dawei Ma,"Adaptive robust control of DC Motors with extended state observer", IEEE Transactions on Industrial Electronics Vol 61.7 ,2014, pp. 3630-3637.

Bosco, Maycon Chimini, et al,"Estimation of parameters and tuning of a speed PI of permanent magnet DC Motor using differential evolution", Electric Machines and Drives Conference (IEMDC), IEEE International,2017,pp.1-6.

Trong-Thang Nguyen (2019). The neural network-based control system of direct current motor driver. International Journal of Electrical and Computer Engineering (IJECE), 9(2), pp. 1445-1452.

Xue, D., Zhao, C., & Chen, Y. (2006, June). Fractional order PID control of a DC-motor with elastic shaft: a case study. In IEEE 2006 American control conference. pp.1-6.

Obaid, B. A., Saleh, A. L., & Kadhim, A. K. (2019). Resolving of optimal fractional PID controller for DC motor drive based on anti-windup by invasive weed optimization technique. Indonesian Journal of Electrical Engineering and Computer Science, 15(1), pp. 95-103.

Trong, T. N. (2017). The Control Structure for DC Motor based on the Flatness Control. International Journal of Power Electronics and Drive Systems (IJPEDS), 8(4), pp.1814-1821.

Trong-Thang Nguyen (2019). The linear quadratic regular algorithm-based control system of the direct current motor. International Journal of Power Electronics and Drive Systems (IJPEDS), 10(2), pp. 768-776.

Khac-Khiem Nguyen, Trong-Thang Nguyen (2019). The sensorless control system for controlling the speed of direct current motor. Indonesian Journal of Electrical Engineering and Computer Science, 16(3), pp. 1171-1178.

Åström, K. J., & Hägglund, T. (2004). Revisiting the Ziegler–Nichols step response method for PID control. Journal of process control, 14(6), pp.635-650.

Mantz, R. J., & Tacconi, E. J. (1989). Complementary rules to Ziegler and Nichols' rules for a regulating and tracking controller. International journal of control, 49(5), pp.1465-1471.




DOI: http://doi.org/10.11591/ijeecs.v19.i2.pp%25p
Total views : 34 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

shopify stats IJEECS visitor statistics