Influence of Device to Device Interconnection Elements on the System Behavior and Stability

Iraj Sadegh Amiri, Ahmed Nabih Zaki Rashed, Preecha Yupapin


This work has presented the interaction between tangential/sagittal cylindrical thin lens in the titled plane parallel crystal. Stability criterion parameters are measured under the control of curvature radius of a spherical mirror, the thickness of the tilted plane crystal, the refractive index of tilted plane crystal, the thickness for a plate of matter and phase angle of the sagittal cylindrical thin lens. Beam radius waist is plotted against the focal length of the tangential cylindrical thin lens. Focal length for both thin lens in resonator crystal is optimized to upgrade the resonator system operation efficiency.


Thin lens; Focal length; Parallel crystal; Titled plane


M. V. Raghavendra, et al., “Estimation of Optical Link Length for Multi Haul Applications,” International Journal of Engineering Science and Technology, vol. 2, no. 6, pp. 1485-1491, 2010.

S.-C. Wang, et al., “Optically Pumped GaN Based Vertical Cavity Surface Emitting Lasers: Technology and Characteristics,” Jpn. J. Appl. Phys., vol. 46, pp. 5397–5407, 2007.

T.-C. Lu, et al., “CW Lasing of Current Injection Blue GaN Based Vertical Cavity Surface Emitting Laser,” Appl. Phys. Lett., vol. 92, pp. 1–3, 2008.

Christopher J. Stapels, et al., “CMOS Based Avalanche Photodiodes for Direct Particle Detection,” Nuclear Instruments and Methods in Physics Research A, vol. 579, no. 1, pp. 94–98, Aug. 2007.

A. Pulvirenti, et al., “Characterization of Avalanche Photodiodes (APDs) for the Electromagnetic Calorimeter in the ALICE Experiment,” Nuclear Instruments and Methods in Physics Research A, vol. 596, no. 1, pp. 122-125, Oct. 2008.

Abd El-Naser A. Mohammed, et al., “Transient behavior and transmission bit rates analysis of optoelectronic integrated devices laser diode (LD) and light emitting diode (LED) under amplification and ionizing irradiation environments,” Journal of Electrical and Electronics Engineering Research, vol. 3, no. 7, pp. 121-133, 2011.

I. T. Lima, et al., “A Receiver Model for Optical Fiber Communication Systems With Arbitrarily Polarized Noise,” Journal of Lightwave Technology, vol. 23, no. 3, pp. 1478–1490, Mar 2005.

S. Norimatsu and M. Maruoka, “Accurate Q-factor Estimation of Optically Amplified Systems in the Presence of Waveform Distortions,” Journal of Lightwave Technology, vol. 20, no. 1, pp. 19–27, Jan 2002.

S. M. Jahangir Alam, et al., “Bit Error Rate Optimization in Fiber Optic Communications,” International Journal of Machine Learning and Computing, vol. 1, no. 5, pp. 435–440, Dec 2011.

S. M. J. Alam, et al., “Improvement of Bit Error Rate in Fiber Optic Communications,” International Journal of Future Computer and Communication, vol. 3, no. 4, pp. 281–286, Aug 2014.

Ahmed Nabih Zaki Rashed, and Mohamed A. Metwae'e, “Optical Filters Dimensions and Thermal Operation Conditions Impact on Its Transmission Considerations in Near Infrared (NIR) Optical Spectrum Transmission Region,” Optoelectronics and Advanced Materials Journal– Rapid Communications, vol. 8, no. 3-4, p. 175 – 184, March-April 2014.

A. Taya, et al., “Design and Analysis of Low Power Universal Line Encoder & Decoder,” Microelectronics and Solid State Electronics Journal, vol. 5, no. 1, pp. 7–13, 2016.

C.T. Manimegalai and S. G. Kalimuthu, “Underwater Optical Channel Analysis Using DPIM & PPM,” European Journal of Applied Sciences, vol. 9, no. 3 pp.154–162, 2017.

Z. Kornain, et al., “The Simulation of Indoor Service Range Prediction of Wireless Radio Access Point for Radio over Fiber System,” IACSIT International Journal of Engineering and Technology, vol. 5, no. 1, pp. 136–140, Feb 2013.

Ahmed Nabih Zaki Rashed, “High Performance Photonic Devices For Multiplexing/Demultiplexing applications in Multi Band Operating Regions,” Journal of Computational and Theoretical Nanoscience, vol. 9, no. 4, pp. 522-531, April 2012.

E. Feltin, et al., “Blue Lasing at Room Temperature in an Optically Pumped Lattice Matched AlInN/GaN VCSEL Structure,” Electron. Lett., vol. 43, pp. 924–926, 2007.

M. C. Shih and C. S. Chen, “A Semiconductor Soliton Cavity Laser Diode and its Output Characteristics,” Japanese Journal of Applied Physics, vol. 50, no. 4, pp. 17-22, 2011.

C.-C. Kao, et al., “The Lasing Characteristics of GaN Based Vertical Cavity Surface Emitting Laser With AlN–GaN and Ta2O5 –SiO2 Distributed Bragg Reflectors,” IEEE Photon. Technol. Lett., vol. 18, no. 7, pp. 877–879, 2006.

J.-T. Chu, et al., “Room-Temperature Operation of Optically Pumped Blue Violet GaN Based Vertical Cavity Surface Emitting Lasers Fabricated by Laser Lift Off,” Jpn. J. Appl. Phys, vol. 45, pp. 2556–2560, 2006.

J.-T. Chu, et al., “Emission Characteristics of Optically Pumped GaN Based Vertical Cavity Surface- Emitting Lasers,” Appl. Phys. Lett., vol. 89, pp. 1–3, 2006.

Total views : 16 times


  • There are currently no refbacks.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

shopify stats IJEECS visitor statistics